| Date | 28/05/2026 |
| Contract Company | IT BASE |
| Company Info | https://www.itbase.es/ |
| Activity / Task | Hardware Installation |
| Client Company | PEPCO |
| City | Lugones, Asturias |
| Complete Date | 28/05/2026 |
| Task Description | Upon arriving at the installation site, I realized that a layout plan hadn’t been prepared. The remote technician and I began planning the layout. The height for the indoor sensor is almost 8 meters, so it has to be mounted on a track for pendant lights, which is 3.60 meters high. The sensor is attached with cable ties, and the cable runs through the track to the wall on the right side. This requires 6 meters of cable, plus another 3.5 meters from the track to the wall/glass, and another 4 meters of height to the control box. The control box is located in a low access panel (photos attached). The outdoor sensor is also installed, attached to the glass with double-sided tape because it wasn’t possible to drill into any metal frame. We had to buy 6 meters of cable channel, install it, and finish the job after testing. (Affirmative from the remote technician) |
Information & Telecommunications Technology Engineer – Ingeniero en Informática & Tecnología